I sanded the insides of the holes with my oscillating spindle sander and rounded the edges of the holes over with a 1/4 inch rounder bit in my router. Lija los bordes cortados para eliminar cualquier aspereza. Corta el cuadrado delineado en la hoja con una sierra circular o una sierra manual. Con un lápiz y cinta métrica, haz un cuadrado de 45 x 45 cm (18 x 18 pulgadas) en la hoja de madera contrachapada. Once the holes are drilled I cut along the outside lines of the rectangle with my jig saw and connected the two holes to make one large handle hole in each of the boards. Mide y corta la base de madera contrachapada. Genuine Hardwood Blocks 6x2x1.2 Inches New Open Box. Using a 2 inch forstner bit I drilled 2 holes in each board on the 2 center points I marked on the rectangle that were 1 inch in from the end. Giant Wood Block Stack Tumble Tower Jenga Giantville Outdoor Play Game Family. These points will act as center marks for the holes that will be drilled I marked a center line horizontally across the rectangle and marked a point 1 inch in from each side.

From the center I measured 3 inches in each direction, marked 2 lines, measured down 4 inches from the top and marked a line across the board, measured 2 inches down from the top and marked another line across.įor the handles I first laid out a rectangle that was centered on each of the side boards 6 inches wide, 2 inches tall, and 2 inches down from the top of the board. Giant Jenga from Phoenixs best choice for inflatables, bounce houses, water slides and other high quality party rental equipment. For the layout of the handles I first found the center point of both the left and right side boards.

Giant jenga